UHU Super Glue Gel 3 g

  • Description

UHU Super Glue Gel 3 g.

PROPERTIES Does not drip Can be corrected in the short term Ideal for porous materials and on vertical surfaces Technical documentation APPLICATION SUITABLE FOR: Ideal for small-area bonds. Glue almost all solid and flexible materials such as many plastics (such as hard PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®) and phenolic resins (Bakelite®)), leather, porcelain, ceramics, metal, wood, cork, felt, cloth (first check suitability) and rubber. Only partially suitable for glass (during a certain period the bond becomes brittle, so that it becomes weakened). TREATMENT FOR USE: Working conditions Do not use at temperatures below + 10 ° C. The glue responds best to a humidity level of 50-70%. Surface requirements Materials to be bonded must be clean, dry, dust and grease-free and well-fitting. DURING USE: Instructions for use 1. Screw the cap firmly on the tube clockwise to pierce the diaphragm. Tip: do not press on the tube while puncturing. 2. Unscrew the cap to make the applicator visible! Apply the glue directly from the tube, using the nozzle, as thin as possible on one side (too much glue slows down the curing process considerably!). Compress parts immediately. Surfaces to be glued must be exactly the same shape and size. After use, clean the nozzle with a dry tissue and close the tube by replacing the cap. Advice For glues with a low humidity, the curing time can be shortened by breathing briefly on one of the parts to be assembled. The best glue results are achieved at room temperature. Points for attention Contains cyanoacrylate. Connects skin and eyelids in seconds. If the product comes in contact with eyes, rinse immediately with plenty of water and seek medical attention. In the event of skin contact, glue can be dissolved by soaking in warm soapy water. Then apply a skin cream. May cause respiratory irritation. Avoid breathing vapors. Keep out of the reach of children. AFTER USE: Stains / residue Wipe off excess glue immediately with a dry cloth. After curing, glue residues are very difficult to remove. Acetone dissolves glue but very slowly (first check suitability). Storage conditions Store in a dry, cool, frost-free place. Storage below + 5 ° C (in the refrigerator) ensures maximum shelf life.
Z-klei
    Delivery time:2-3 dagen
Add to cart