Lortone Polishing machine model 45C

Z-klei
    Delivery time:1-2 dagen
Add to cart
  • Description

Polishing  machine

This Lortone Drum Machine 45C is the big brother of the 3A, an ideal machine for high gloss polishing of silver clay and metal clay. The engine is low-noise and with its 70W it ensures an economical process of the polishing process. This machine with the capacity of 1.5 liters is perfect in workshops and on the work table for large amounts of polishing work.

Lortone makes quality drum machines in a price-favorable class. The drum machine or tumbler is widely used in the polishing of precious metal in combination with stainless steel balls.

 

Fill the drum with 1kg polishing balls and place your jewelry on the balls, fill the drum so that there is about 2-3 cm of water above the balls. Now add polishing soap or some washing-up liquid, a dash of ammonia may be added for the additional degreasing of jewelery.

 

With regular use, you can rinse the balls and store them under water. With occasional use we recommend to rinse the balls and let them dry on a dishcloth.

 

If the bullets turn dark, it is important to first clean the balls before you polish further precious metal.

 

Note: Polishing balls and soap available separately.

 

Dimensions: 265x165x220mm
Weight: 3,2 kilos
Drum outside: 167x123mm
Drum internal: 145x88mm
Drum weight: 0.87 kilos
Drum contents: 1.5 liters
Motor: 220 / 230V, 70W


 

Zirconia's, lab-created stones, (UV) resin, ceramics and glass can safely be polished, for some gems it is advisable not to do this. This has to do with the hardness of a stone. Polishing balls can also get trapped in small openings such as beads syringe etc, if possible, you can use a pipe cleaner or rope to temporarily seal a hole so that the balls of the same diameter can not close the hole or get stuck. If it does happen, put the jewelery in the freezer for a while so that the metal can shrink and you can probably remove the balls.